Vehicles
100 not categorized PORSCHE CAYMAN S EMBLECan't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.91134101310ATK The reconditioning process includes full inspection of the cross member to ensure proper operation after the remanufacturing process. We then disassemble, degrease and media blast the part. Once fully prepared, we seal it with a corrosion resistant plating. Send us your cross member and we will have it reconditioned for you. We do not offer a core exchange on this part. If your original part is defective and cannot be salvaged, we will notify you and make arrangements for its return. Sold individually. 1 necessary per car.
$297.00
Make a selection 914503009 Perfect to reinstall the factory or aftermarket fiberglass valance to your 914. we personally assemble this complete kit from factory nuts bolts and screws as well as custom made no longer available from the factory rubber spacers. perfect for the fussy concours enthusiast. General Fitment914 1970-76
$19.95
Make a selection 944VIC8501 Just pop off your emblem and reinstall into new unit. Remove old worn out unit, install new one. Please specify desired color and shift pattern when ordering. This part has a 2-3 week lead time. General Fitment944 1985-88944 1989-91 968 1992-95
$109.50
Make a selection 91455107712A700 Shop-fitted custom carpet kits for a new interior look our custom carpet kits are better because the material resembles the original and we have fit them in our restoration shop! the loop kit will brighten your interior and complete your restoration, while the plush will update your 914 to the later 911 look. the kits have 10 pieces and completely carpet the interior. We also have limited supply on new factory carpet kits. Please call. General Fitment914 1970-76
$425.00
Make a selection 93060610500ATK The remanufacturing process includes full inspection to ensure proper operation after the remanufacturing process. We then disassemble, clean, degrease and rebuild to factory specifications. Remanufacturing is done in Germany, so the lead times can vary. Send us your original warmup regulator and we will have it remanufactured for you. We do not offer a core exchange on this part. Please note: please package your part as carefully as possible to ensure that damage is not caused en route to us.
$744.70
Make a selection 91461391515 What a great new find of a hard to get piece! Why settle for used, and find out if it works or not get a new one today. This is the wiper washer switch that mounts on the right side of the steering column on your Porsche 914 '74 - '75. This is the switch for the wipers to go on and the the squirt jets to water when your windshield is not visible. This is a 6 male prong wire connector and the part number is 914-613-915-15. Comes complete assembled with the wiper squirts that stick out as shown in the picture. View/Change Diagram
$128.50
Make a selection 959SB Up to 1987, all 911 came with a long black metal stick shift between the seats, rising up from a rubber shift boot. Our 911 shift boot is a great way to cover up the shift and update it to a modern luxurious look. 1987 through 1989, Porsche changed the transmission to a better unit, called a “g-50”. The leather on these were very thin and wear out quickly, especially lighter colors such as linen and camel. Our replacement boots uses thicker leather to avoid this problem. Please indicate color and specify 4 or 5 speed emblem when ordering. This part has a 2-3 week lead time. General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1970-73
$89.99
Make a selection 96433102100RATK Unsure about installing a replacement bushing? Send us your trailing arm and we will properly recondition and install the bushing for you. The reconditioning process includes full inspection of your trailing arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our rear clubsport trailing arm bushings, part # FVD3310212291. Our rear trailing arm bushings contain rubber inserts with a shore hardness value of 85, like what is used on rennsport models. They offer rs style handling characteristics, superior durability and are still forgiving enough for street use. When reconditioning the trailing arms, we als...(choose a part on the right to read more)
$672.10
Make a selection 944VIC02 Complete knob boot units install in seconds: our "vic" line of products avoids the need to glue. Just pop off your emblem and reinstall into new unit. Remove old worn out unit, install new one. That’s it! This part has a 2-3 week lead time. General Fitment924 1976-79944 1982-85 924 1980-85
$99.95
Make a selection 96434101807ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our OEM front control arm bushings, part # FVD3419991. They are made with 65 shore rubber like the original control arms. Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can be made for...(choose a part on the right to read more)
$418.00
Make a selection 96434101707ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our OEM front control arm bushings, part # FVD3419991. They are made with 65 shore rubber like the original control arms. Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can be made for...(choose a part on the right to read more)
$418.00
Make a selection 9780929758268 The second edition of this book continues the restoration of a 356 Porsche to driver level condition. This book does not spend time or money creating the “perfect” 356, and does not necessarily search for nos (new old stock) replacement panels if a reproduction panel or patch is appropriate; but the book strives to give you a restoration that will be correct, admired and driven. This second edition provides more detail and contains additional comments to assist those restoring a 356 which was purchased disassembled. this second edition follows the restoration of a 1957 sunroof coupe from the time of purchase to the first drive. additionally, detailed comments are provided from vendors, such as media blast...(choose a part on the right to read more) General FitmentACCESSORY
$29.50
Make a selection 964347009BXATK This steering rack is a remanufactured part with a core, as such an additional charge (a core deposit) will be added to the purchase price of the part. After receiving your new part, kindly send back your old part, or core . Once the core is returned to us and it has been inspected to ensure it is rebuild-able and resell-able, the core deposit will be refunded. The remanufacturing process includes full inspection and testing for structural integrity. We then disassemble and bead blast to remove corrosion. Internals are micro-finished to OEM specifications. Sealing surfaces are carefully checked and restored prior to installing new premium seals and o-rings. Each unit is then carefully tested for full functional...(choose a part on the right to read more)
$1,633.50
Make a selection 99312301352ATK Our k-16 remanufactured turbo is cost competitive and is a direct replacement. Simply send us your original k16 turbochargers and a borg warner / kkk certified technician will remanufacture your turbo. The remanufacturing process includes full inspection to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will replace the turbine wheels, thrust bearings, install new seals, install new waste gates, recondition the internals and high speed balance the turbo. This ensures reliability and superior performance for many years to come. The remanufacturing is done on an exchange basis only. You must send us your original k16 turboc...(choose a part on the right to read more)
$2,194.50
Make a selection 99312301452AT Our k-16 remanufactured turbo is cost competitive and is a direct replacement. Simply send us your original k16 turbochargers and a borg warner / kkk certified technician will remanufacture your turbo. The remanufacturing process includes full inspection to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will replace the turbine wheels, thrust bearings, install new seals, recondition the internals and high speed balance the turbo. This ensures reliability and superior performance for many years to come. The remanufacturing is done on an exchange basis only. You must send us your original k16 turbocharger. After receiving y...(choose a part on the right to read more) General Fitment911 1994-98
$2,194.50
Make a selection 99334101802ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install original control arm bushings. . Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can be made for its return to you. We do not offer a core exchange on this part. Sold individually....(choose a part on the right to read more)
$418.00
Make a selection 996603012BX The item has been completely disassembled, cleaned, and examined for wear and breakage. Worn out, missing or nonfunctioning components have been replaced with new or rebuilt components. It is the functional equivalent of a new part and is virtually indistinguishable from a new part. General FitmentBOXSTER 1997-04911 1998-05
$325.00
Make a selection AP997TT174 As the horsepower on your 997 turbo increases, so does the need for preventative products to ensure your boost is holding strong. The stock boost hoses are much like a rubber brake line that expands outwards under pressure. This causes a loss in boost pressure and can sometimes relate to the hose blowing off the turbo or y-pipe leaving you stranded. Because the agency power silicone boost hoses are made from 4ply silicone with cnc machined 6061 aluminum ends, they will never pop off. The property of the silicone also keeps it at a fixed circumference as the silicone will not expand. General Fitment911 2005-08
$699.95
Make a selection FVD116802 The reinforced sachs performance pressure plate (clutch cover) has fundamental advantages against a genuine pressure plate, such as a higher transmittable torque and higher resistance against thrust. It also allows for faster and sportier gearshifts. That makes it extremely useful for street tuning, endurance races and hill climbing. The sachs performance clutches are assembled by hand. This guarantees the highest quality attributes in clamping load and release characteristics. Features: higher transmittable torque. Higher clamping load. Less abrasion. Direct replacement for the oe pressure plate. 225 mm. Max torque: 413 lb/ft (560 nm) * *dependent on the type of disc material being used with this pressure plat...(choose a part on the right to read more) General Fitment914 1970-76911 1970-73
From $907.21
Make a selection FVD116838 4 puck sintered metallic material which has a higher thermal capacity than organic friction material. Rigid center hub. Aggressive start performance. Hub length 1.18 inches (30mm) outside 1.21 (30.8mm) 240mm weighs: 2.2 lbs (1.01 kg) direct replacement for the oe clutch disc. Made in Germany by zf sachs race engineering. Please note: due the aggressive start performance of the sintered disc, we do not recommend this disc for street cars. We also recommend that you purchase a sport / racing pressure plate in conjunction with this disc. The sachs racing clutch discs with sintered metal plates have a higher friction coefficient than plates with organic friction material. That allows for higher transmittable torque...(choose a part on the right to read more) General Fitment911 GT3 2003-05911 1994-98 968 1992-95 911 1989-94 944 1982-85 944 1985-88
From $477.94
Make a selection FVD116858 4 puck sintered metallic material which has a higher thermal capacity than organic friction material. Torsion sprung. Less aggressive start performance than a rigid center. Made in Germany by zf sachs race engineering. Weighs 4.18 lbs (1.9 kg) the sachs racing clutch discs with sintered metal plates have a higher friction coefficient than plates with organic friction material. That allows for higher transmittable torque and makes them more dirt and oil resistant. The sachs performance clutches are assembled by hand. This guarantees the highest quality attributes in clamping load and release characteristics. General Fitment911 1989-94
From $575.18
Make a selection FVD1169281 Higher transmittable torque. Higher clamping load. Less abrasion. Direct replacement for the oe pressure plate. 240 mm. Max torque: 775 lb/ft (1,050 nm)* weighs: 9.5 lbs. (4.3 kg) the reinforced sachs performance pressure plate (clutch cover) has fundamental advantages against an oe pressure plate, such as a higher transmittable torque and higher resistance against thrust. It also allows for faster and sportier gearshifts. That makes it extremely useful for street tuning, endurance races and hill climbing. The sachs performance clutches are assembled by hand. This guarantees the highest quality attributes in clamping load and release characteristics. Installation notes for those with single mass flywheel kits: ...(choose a part on the right to read more) General Fitment911 TURBO/GT2 2007-09911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1994-98 968 1992-95 911 1989-94
From $992.73
Make a selection FVD123011 These actuators are assembled with yellow springs for boost levels in the 9-15 psi (0.62-1.03 bar) range. Additional springs are available for tuning to custom boost level. These replacement actuators are supplied complete with brackets ready to install. General Fitment911 TURBO/GT2 2001-05
From $524.70
Make a selection 91455107712700L Shop-fitted custom carpet kits for a new interior look our custom carpet kits are better because the material resembles the original and we have fit them in our restoration shop. the loop kit will brighten your interior and complete your restoration, while the plush will update your 914 to the later 911 look. the kits have 10 pieces and completely carpet the interior. General Fitment914 1970-76
$315.00
Make a selection FVD123020ATK Our k24 sport turbocharger is based off the optional k24 turbochargers, found in the GT2 or 993 turbo x50 models. They are remanufactured by borg warner certified technicians in Germany and are a cost-effective solution. The remanufacturing process includes full inspection of the turbocharger to ensure proper operation after the remanufacturing process. We then disassemble, clean and degrease the unit. The compressor wheels are exchanged, lightened and modified for more air flow. All clearances / shaft tolerances are checked for precision to ensure reliability. The end result is 20-30 additional horsepower, in the low and mid rpm range over the factory turbo. The sport turbo also has less lag than a factory k24...(choose a part on the right to read more)
$2,042.70
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |